ISSN 0718-3305 Online version
In order to submit and publish an article to Ingeniare, no cost should be paid. In addition, there are no charges to the author for the manuscript processing, so the entire process is free of charge.
The authors interested in publishing in Ingeniare. Revista chilena de ingeniería must send their works adjusted according to the rules and formatting stated bellow.
The topics must be related to engineering fields: electronics, electricity, computing, mechanics, industry, metallurgy, chemistry, engineering teaching and other related disciplines
When submitting a paper the authors should do the following:
1. Preliminary selection and peer evaluation
The editor will first verify that the content of the article is appropriate for this journal and that the manuscript is set in accordance with the journal's standards. The editor may reject, at his discretion, submissions that do not comply with the general directions, are poorly written or do not possess sufficient scientific or technological merit.
Articles that pass the preliminary selection are sent for peer review by specialists and scientists having known research work in areas related to the article. Upon assessing the article, peer reviewers write a report including comments and suggestions recommending its acceptance or rejection.
2. Evaluation by peer reviewers
In the process of evaluation of the article, reviewers will consider the soundness of the experimental design, verifying that the conclusions coincide with the statistical and experimental data. Reviewers will also evaluate that the sources consulted by the author(s) were the most pertinent or relevant to the topic discussed. Wording and writing correctness as well as graphic quality will also be assessed.
During this process, the identity of the reviewers will not be known by the author(s), but the latter's will be available to the reviewers.
3. The editor's decision
After assessing the reviewers' recommendations, the editor will make a decision based on the following options:
Accepting the article, subject to minor revisions: The editor will return the article to the author(s) with a list of suggestions for minor corrections, including his own as well as those made by the reviewers. Once the modified manuscript is received by the editor, a confirmation of acceptance of the article and the publication date will be sent back to the author(s).
Minor revisions in an article include: typographical errors, page numbering, articles cited in the text that are not in the bibliography and vice versa, slight discrepancies between the summaries and the abstract, as well as moderate corrections to the text.
Returning the article for major revisions: The editor will return the article to the author(s) with a list of suggestions for major corrections that must be made before the article is eventually accepted for publication.
Major revisions include: analyzing data using other statistical tests, adding or redoing figures and tables, replicating experiments, rewriting the discussion of the problem using additional literature and making substantial changes to the text. The revised article will be returned to the author with the observation "not publishable".
The author should return the article to the Editor, complying thoroughly with the observations, stating that the changes were made, in order to be accepted for a new evaluation by the editor and eventually peer reviewers.
Evaluation of the article, in this stage, will result as final acceptance or rejection.
Reject: The editor will return the article with the result of peer evaluation, reporting the reason(s) for the rejection. This decision will be final (in most cases).
Reasons for rejection of an article include: inappropriate content, manuscripts not complying with the requirements for publication and/or lacking scientific or technological merit.
Rules of publication to authors
The work submitted for evaluation must not have "Copyright" granted to third parties. The editor reserves the right to make minor edits, for a better presentation of the work. Works may be submitted in English (preferably) and Spanish.
Characteristics of publications
The following types of contributions are considered:
The editor will be in charge of authorizing the publication of the works, whose content will be the exclusive responsibility of the authors. Modifications or rejections will be communicated to all authors, through explanatory notes.
The articles cannot be longer than 25 pages and must respect the following format:
The rest of the text should be written with Calibri font, font size 12 pt., Simple paragraph format and without indentation. Footnotes: must be at the end of each page, font size 10 and justified.
The author must explain or name what each symbol used in the equations means, if necessary.
The author must refer to all the equations, figures and tables exposed in the article.
Las CONCLUSIONES tendrán que ser claramente definidas y deberán cubrir lo siguiente: lo que se demuestra en el trabajo, su relevancia, ventajas y limitaciones, aplicación de los resultados y perspectivas a futuro.
ACKNOWLEDGMENTS may be included, remarking the persons or institutions that collaborated in intellectual, material or financial matters
The REFERENCES will be indicated with a number in parentheses and as superscript (N °), and they will be listed at the end of the publication with numbers in square brackets [N °]. A maximum of 50 references is recommended, preferably citing references of first source (main works, those of greater relevance, not their derivatives). Pay attention to the use of commas and points. They should be based on indexed journals, books or patents and be presented as follows:
[N°] Initials of the name o the autor(s) Surname of the autor(s), Title of the book, edition xth ed. City, State (USA only), Country: editorial, year, ch. x, sec. x, pp. xxx–xxx.
[N°] Initials of the name o the autor(s) Surname of the autor(s), Chapter Title, in Title, Edition, Ed., xth ed., State, Country: Editors, year, ch. x, sec. x, pp. xxx–xxx.
[N°] Initials of the name o the autor(s) Surname of the autor(s), Title of the book, edition xth ed. City, State (USA only), Country: editorial, year, ch. x, sec. x, pp. xxx–xxx.[Online]. Avalaible: www.book.com
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Article Title”, Name of the Journal, vol. x, no. x, pp. xxx–xxx, month, year, doi.
Electronic Journal Article:
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Article Title”, Name of the Journal, vol. x, no. x, pp. xxx–xxx, month, year, doi. [Online]. Avalaible: www.web.com
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Article Title”, Name of the Conference, City, State, Country, Date, Article number.
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Article Title”, Name of the Conference, Location, Date, pp. xxx-xxx, doi.
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Patent Title”, Country xxx, date.
In case of a reference taken from the Internet, the name of the URL of the site, the day, month and year of consultation should be written as indicated below. Do not use hyperlinks.
[N°] Initials of the name o the autor(s) Surname of the autor(s), “Page title”, web title. Accessed: “date”. [Online]. Avalaible at: url.
Articles may contain references to authors' works, as long as the citations correspond to the most pertinent and relevant of the topic developed.
The final proof of the respective article approved for publication will be sent to the authors, before its printing, in a PDF file for approval. Only typographical or editing errors can be indicated for printing correction. These tests must be returned to the Editor in no more than 48 hours after being received, also indicating that Ingeniare is authorized. Chilean Journal of Engineering publication of the manuscript.
The EQUATIONS must be written in Math Type. Both figures, equations, and TABLES must have a number that identifies them, to which reference will be made in the text. The figures and photographs must be clear, with a minimum resolution of 300 dpi, they must be numbered and have an explanatory legend at the bottom of them. The Tables should be numbered, and the title of these should be on the top of it.
Periodicity: Its periodicity is of continuous publication since 2023
The manuscripts must be in Microsoft Word and PDF format, according to the instructions presented.
In case of sending a manuscript, the researcher must register as an author and send it through the site: https://cl.submission.scielo.org/index.php/ingeniare. Manuscripts that do not comply with the standards and publication format will not be considered suitable to be entered into the review process and will be returned to the authors.
Submission template (Ingeniare Rules 2018)
The authors should send a cover letter along with their manuscript, through the site: https://cl.submission.scielo.org/index.php/ingeniare
Acceptable formats for the manuscript are Microsoft Word and PDF. In case you would like to send your manuscript, you should register as author and send the manuscript through our website: https://cl.submission.scielo.org/index.php/ingeniare.
Manuscripts that fail to meet the standards and publication format will not be considered suitable to enter the review process and will be returned to the authors.
Prior to printing, final version of the approved article will be sent to the authors in PDF file, for revision.
Only typographical or editorial errors can be indicated and corrected. Within 48 hours, it must be returned to the Editor, stating as well the authorization to Ingeniare. Revista chilena de ingeniería, to publish the manuscript.